1.1 briefly 
 The channel gate is intelligent channel of Innovation through Science and Technology Development Co., Ltd. After years of development, production management equipment. The equipment, machinery, electronics, microprocessor control and a variety of reading and writing technology integration. Reliable security protection devices and real-time alarm system with directional interface to configure a variety of equipment to read and write, a common and coordinated to achieve intelligent control and management of the channel. 
 Stainless steel plate stamping molding equipment shape, nice shape, rust-proof, durable, and external standard electrical interface, barcode cards, ID cards, IC card reader, etc. can be easily integrated in this device, to provide for access to personnel the passage of a civilized, orderly way, while at the same time to eliminate unauthorized personnel access; another system is also designed to meet fire safety requirements in the event of an emergency to ensure that the channel unimpeded, to facilitate the timely evacuation. 
 1.2 Features 
 1) with automatic reset function, pedestrian reading valid card, not pass through the system within a specified time, the system will automatically cancel the pedestrian the access rights; 
 2) uniform standards of external electrical interface with a variety of card readers attached, and through the remote management computer control and management; 
 3) The entire system is running smooth, low noise; 
 1.3 The main technical parameters 
 1) Supply Voltage: AC220 ± 10% V, 50HZ 
 2) Drive motor: DC motor 24V/100W 
 3) Operating ambient temperature:-15OC - 60 of OC 
 4) Relative humidity: ≤ 90% relative humidity, no condensation 
 5) input interface: 12V level signal or pulse width> 100ms 12V pulse signal drive current> 10mA 
 6) communication interface: RS485 electrical standards, 
 7) Communication distance: ≤ 1200 m 
 8) Pass speed: 30 / min (normally open mode), 20 / minute (normally closed mode) 

 9) gate opening and closing time: 1 seconds 
 2 Product Dimensions 
 2.1 Equipment Dimensions 









 3. Product structure and working principle 


 3.1 channel gate mechanical systems 
 Channel gate mechanical system is divided into two parts of the structural frame and the movement. Frame structure as the carrier is installed on the direction that the read-write device, movement composed mainly motor, rack, drive shafts, gates, etc.; 
 3.2-channel gate electrical control system 
 The electronic control system by the reader, the main control board, limit switches, transformers, battery, solenoid, relays and other components. 
 Reader (not included): read card information after the judge handling the control board issued a signal (switching signal); 
 3.3 System Works 
 1) Turn on the power after three seconds to enter the work state. 
 2) card reader reads a valid card, the buzzer will issue a melodious sound, prompted reader to pedestrians; also be judged on the information read from the card, processing, and the main control board issued a signal ; 
 3) the main control board receives the card reader, and comprehensive treatment issued to the motor control signal, the motor running, limit switches control the motor to move point of view, gates open (normally open mode, the motor does not work) to allow pedestrian traffic;